1 x 4 Axis Motion Controller
1 x 4GB USB Flash Drive
1 x USB Cable
The highest single output pulse is 500 KHz and the pulse width is adjustable. Support common stepper motor and servo motor.
Use ARM+FPGA design framework.
Ordinary digital input interface of 16-circuitoptocoupler coupling isolation
Ordinary digital input interface of 3-circuit optocoupler coupling isolation
Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output);
Support the 4 axis stepper motor control, the highest control pulse output of single axis is 500KHz;
ARM9 main control chip;
FPGA core algorithm chip;
4.3 inches TFT screen, resolution ratio: 480*272;
17 operational keys;
The main control equipment is 18V-32V power input, the current capacity isrequired not to be lower than 0.5A;
Support the USB flash disk to read the G code,and the size of G codefile has no requirement;
Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market.
Support the panel key with single-axis manual operation, manual step and CONToperation;
Support the operation of quickly specify the running position;
Support the multi coordinate systems (with automatically saving function in case of power cut);
Support saving data automatically after power down (press the start to automatically save the data in the operation, automatically save the data after power down)
The panel size of the product is 163mm*102mm*5mm;
The size of main body is 156mm*93mm*45mm;
The size of square hole installed on the equipment cabinet is 156mm*93mm